Name one metal and one non-metal which exist in liquid state at room temperature.
Why are metals called electropositive elements whereas non-metals are called electronegative elements?
Name the most abundant metal in the earth’s crust.
Name the most abundant non- metal in the earth’s crust.
Name one metal which has a low melting point.
Name the metal which is the poorest conductor of heat.
State whether the following statement is true or False:Non-metals react with dilute acids to produce a gas which burns with a ‘pop’ sound.
Non-metals do not react with dilute acids to produce a gas which burns with a ‘pop’ sound.
From amongst the metals sodium, calcium, aluminium, copper and magnesium, name the metal:(i) which reacts with water only on boiling, and
(ii) another which does not react even with steam.
(ii)Copper does not even react with steam.
What changes in the colour of iron nails and copper sulphate do you observe after keeping the iron nails dipped in copper sulphate solution for about 30 minutes?
What is aqua-regia ? Name two special metals which are insoluble in comman reagents but dissolve in aqua-regia.
Give the names and formulae of (a) two acidic oxides, and (b) two basis oxidics.
(b) the name of two basic oxides are Sodium oxide and magnesium oxide.
What name is given to those metal oxides which show basis as well as acidics behavior ?
Name two metals which form amphoteric oxides.
Aluminium and Zinc.
A copper coin is kept immersed in a solution of silver nitrate for some time. What will happen to the coin and colour of the solution ?
Which property of copper and aluminium makes them suitable:(a) For making cooking utensils and boilers?
(b) for making electric wires?
(a) for making cooking utensils and boilers high thermal conductivity is the property of metal required.
(b) For making electric wires high electrical conductivity is the required property of the metal.
Write the names and formulae of (a) a metal hydride, and (b) a non-metal hydride.
Name the metal which has been placed:(a) at the bottom of the reactivity series
(b) at the top of the reactivity series.
(c) just below copper in the reactivity series
(a) At the bottom of the reactivity series the metal which has been placed is Gold.
(b) At the top of the reactivity series the metal which has been placed is Potassium.
(c) Just below copper in the reactivity series the metal which has been placed is Mercury.
Which of the two metals is more reactive: copper or silver ?
Name one metal which is stored in kerosene oil.
Name one non-metal which is stored under water.
Write equation for the reaction of:(a) sodium with oxygen
(b) magnesium with oxygen
(a) 4Na + O2→ 2Na2O
(b) 2Mg + O2→ 2MgO
Name two metals which are used:(a) for making electric wires.
(b) for making domestic utensils and factory equipment.
(c) for making jewelry and to decorate sweets.
(a) For making electric wires, two metals used are Aluminium and Copper.
(b) For making domestic utensils and factory equipment the two metals used are Copper and Aluminium.
(c) For making jewelry and to decorate sweets the two metals used are Gold and Silver.
Which metal foil is used for packing some of the medicine tablets ?
Name the non-metal which is used:(a) to convert vegetable oil into vegetable ghee (solid fat).
(b) as a rocket fuel (in liquid form).
(c) to make electrodes of dry cells.
(d) to preserve food materials.
(e) in the valcanisation of rubber.
(a) To convert vegetable oil into vegetable ghee (solid fat) the non-metal which is used is Hydrogen.
(b) As a rocket fuel (in liquid form) the non-metal which is used is Hydrogen.
(c) To make electrodes of dry cells the non-metal which is used is Carbon (as Graphite).
(d) To preserve food materials the non-metal which is used is Nitrogen.
(e) In the valcanisation of rubber the non-metal which is used is Sulphur.
Name one property which is characteristic of (a) metals, and (b) non-metals.
What is meant by “brittleness” ? which type of elements usually show brittleness : metals or non-metals ?
What will happen if a strip of zinc is kept immersed in a solution of copper sulphate ?
What will happen if a strip of copper is kept immersed in a solution of silver nitrate (AgNO3)?
What happens when iron nails are put into copper sulphate solution ?
How would you show that silver is chemically less reactive than copper ?
Give reasons for the following:Blue colour of copper sulphate solution is destroyed when iron filings are added to it.
Name a non-metal having a very high melting point.
Which property of graphite is utilized in making electrodes ?
Name two non-metals which are both brittle and non-ductile.
Explain why, the surface of some of some metals acquires a dull appearance when exposed to air for a long time.
Complete and balance the following equations:(a)
(b)
(c)
(d)
Fill in the following blanks with suitable words:(a) Magnesium liberates ________ gas on reacting with hot boiling water.
(b) The white powder formed when magnesium ribbon burns in oxygen is of ________
(c) Ordinary aluminium strips are not attacked by water because of the presence of a layer of ________ on the surface of aluminium.
(d) A metal having low melting point is ________ but a non-metal having very high melting point is ________
(e) Calcium is a ________ reactive metal than sodium.
(a) Hydrogen gas is liberated when magnesium react with hot boiling water.
(b) When magnesium ribbon burns in oxygen is of magnesium oxide, the white powder is formed.
(c) Ordinary aluminium strips are not attacked by water because of the presence of a layer of aluminium oxide on the surface of aluminium.
(d) A metal having low melting point is Sodium but a non-metal having very high melting point is Dimond.
(e) Calcium is a less reactive metal than sodium.
Two non-metals combine with each other by the sharing of electrons to form a compound X. (a) What type of chemical bond is present in X?
State whether X will have a high melting point or low melting point.
Will it be a good conductor of electricity or not?
Will it dissolve in an organic solvent or not?
A metal combines with a non-metal by the transfer of electrons to form a compound Y.(i) State the type of bonds in Y.
(ii) What can you say about its melting point and boiling point ?
(iii) Will it be a good conductor of electricity?
(iv) Will it dissolve in an organic solvent or not ?
(ii) It has a high melting and boiling point.
(iii) Yes it will be a good conductor of electricity.
(iv) No it will not dissolve in an organic solvent.
The electronic configurations of three elements X, Y and Z are as follows:X 2, 4
y 2, 7
z 2, 1
(a) Which two elements will combine to form an ionic compound?
(b) Which two elements will react to form a covalent compound ? Give reasons for your choice.
(b) The two elements which will react to form a covalent compound are Y and Z.this is because a covalent bond is formed when both the reacting atoms need electrons to achieve the inert gas electron arrangement.
An element A has 4 valence electrons in its atom whereas element B has only one valence electron in its atom. The compound formed by A and B does not conduct electricity. What is the nature of chemical bond in the compound formed ? Give its electron-dot structure.
In the formation of a compound XY2 atom X gives one electron to each Y atom. What is the nature of bond in XY2 ? Give two properties of XY2
1) when it is dissolved in water it will conduct electricity.
2) It would have higher melting point as well as boiling.
The electronic configurations of two elements A and B are given below:A 2, 6
B 2, 8, 1
(a) What type of chemical bond is formed between the two atoms of A?
(b) What type of chemical bond will be formed between the atoms of A and B?
(b) The type of chemical bond which will be formed between the atoms of A and B is ionic bond.
Four elements A, B, C and D have the following electron arrangements in their atoms:A 2, 8, 6
B 2, 8, 8
C 2, 8, 8, 1
D 2, 7
(a) What type of bond is formed when element C combines with element D?
(b) Which element is an inert gas?
(c) What will be the formula of the compound between A and C?
(b) The element B is an inert gas as it has complete octet configuration.
(c) The formula of the compound between A and C will be C2A. This is because A needs two electrons to complete its octet.
An element X of atomic number 12 combines with an element Y of atomic number 17 to form a compound XY2. State the nature of chemical bond in XY2 and show how the electron configurations of X and Y change in the formation of this compound.
The electronic configurations of three elements A, B and C are as follows:A 2, 8, 1
B 2, 8, 7
C 2, 4
(a) Which of these elements is a metal?
(b) Which of these elements are non-metals?
(c) Which two elements will combine to form an ionic bond?
(d) Which two elements will combine to form a covalent bond?
(e) Which element will form an anion of valency 1?
(b) Elements B and C are non-metal.
(c) Element A and B will combine to form an ionic bond.
(d) Covalent bond is formed by the combination of elements B and C.
(e) Element B will form an anion with valency 1 since it needs only 1 electron to complete its octet.
The electric configurations of four particles A, B, C and D are given belowA 2, 8, 8
B 2, 8, 2
C 2, 6
D 2, 8
Which electronic configuration represents:
(i) magnesium atom?
(ii) oxygen atom?
(iii) sodium ion?
(iv) chloride ion?
(ii) C will be the desired answer as atomic number of oxygen atom is 8.
(iii) D represents the sodium ion, as it has E.C of 2,8.
(iv) A represents chloride ion because it has E.C of 2, 8, 8.
The atomic number of an element X is 12.(a) What must an atom of X do to attain the nearest inert gas electron configuration?
(b) Which inert gas is nearest to X?
(b) Neon is the inert gas which is nearest to X.
The atomic number of an element Y is 16.(a) What must an atom of Y do to achieve the nearest inert gas electron arrangement?
(b) Which inert gas is nearest to Y?
(b) Argon is the inert gas nearest to Y.
you can buy solid air-freshners in shops. Do you think these substance are ionic or covalent? why ?
Give the formulae of the chlorides of the elements X and Y having atomic numbers of 3 and 6 respectively.Will the properties of two chlorides be similar or different? Explain your answer.
A zinc ore gave CO2 on treatment with a dilute acid. Identify the ore and write its chemical formula.
What chemical process is used for obtaining a metal from its oxide?
State two ways to prevent the rusting of iron.
1) by painting it,
2) prevention can also be done by applying grease or oil over it.
What is meant by galvanization ? Why is it done?
Name the metal which is used for galvanising iron.
Explain why, iron sheets are coated with zinc.
Why do we apply paint on iron articles?
Give reason for the following:Carbonate and sulphide ores are usually converted into oxides during the process of extraction of metals.
Name a reducing agent that may be used to obtain manganese from manganese dioxide.
Name an alloy of lead and tin.
Give the composition of an alloy called solder. State its one property and one use.
What is an amalgam?
How many carats is pure gold? Why is pure gold not suitable for making ornaments?
Name one method for the refining of metals.
State two conditions for the rusting of iron.
1) Presence of air (oxygen),
2) Presence of water (or moisture).
In one method of rust prevention, the iron is not coated with anything. Which is this method?
Name two alloys of iron. What elements are present in these alloys?
Give reason for the following: Silver, gold and platinum are used to make jewellery.
Which metal becomes black in the presence of hydrogen sulphide gas in air?
Name the gas in air which tarnishes silver articles slowly.
Silver metal does not combine easily with oxygen but silver jewellery tarnishes after some time. How?
Write the composition of the alloy called bronze. Give two uses of bronze.
Why does a new aluminium vessel lose shine so soon after use?
Why do gold ornaments look new even after several years of use?
Name two metals which are highly resistant to corrosion.
Which property of 'solder' alloy makes it suitable for welding electrical wires?
Explain why, carbon cannot reduce oxides of sodium or magnesium.
Why are the metals like Na, K, Ca and Mg never found in their free state in nature?
Name one metal each which is extracted by:(a) reduction with carbon.
(b) electrolytic reduction.
(c) reduction with aluminium
(d) reduction with heat alone.
(b) Sodium is extracted by electrolytic reduction.
(c) Manganese is extracted by reduction with aluminium
(d) Mercury is extracted by reduction with heat alone.
Fill in the following blanks with suitable words:(a) The corrosion of iron is called ................
(b) ................ and ................ are necessary for the rusting of iron.
(c) The process of depositing a thin layer of zinc on iron articles is called................
(d) Tiffin boxes are electroplated with ................ but car bumpers are electroplated with ................ to protect them from rusting.
(e) The corrosion of copper produces a ................ coating of basic copper carbonate on its surface.
(f) Brass is an alloy of copper and ..............
(g) Bronze is an alloy of copper and ..............
(h) The non-metal present in steel is ..............
(i) The alloy in which one of the metals is mercury is called an.............
(j) The electrical conductivity and melting point of an alloy is .............. than that of pure metals.
(k) The rocky material found with ores is called..............
(b) Air and Water are necessary for the rusting of iron.
(c) The process of depositing a thin layer of zinc on iron articles is called galvanization.
(d) Tiffin boxes are electroplated with tin but car bumpers are electroplated with chromium to protect them from rusting.
(e) The corrosion of copper produces a green coating of basic copper carbonate on its surface.
(f) Brass is an alloy of copper and zinc.
(g) Bronze is an alloy of copper and tin.
(h) The non-metal present in steel is tin.
(i) The alloy in which one of the metals is mercury is called an amalgam.
(j) The electrical conductivity and melting point of an alloy is less than that of pure metals.
(k) The rocky material found with ores is called gangue.
How is manganese extracted from manganese dioxide, Mn02? Explain with the help of an equation.
What is a thermite reaction? Explain with the help of an equation. State one use of this reaction.
Which one of the methods given in column I is applied for the extraction of each of the metals given in column II:Column I
(i) Electrolytic reduction
(ii) Reduction with Carbon
(iii) Reduction with Aluminium
Column II
(a) Aluminium
(b) Zinc
(c) Sodium
(d) Iron
(e) Manganese
(f) Tin
Give reason why copper is used to make hot water tanks but steel (an alloy of iron) is not.
Explain why, the surface of some metals acquires a dull appearance when exposed to air for a long time.
Why does aluminium not corrode right through?
What is meant by 'anodising'? Why is it done?
Why is an iron grill painted frequently?
Explain why, though aluminium is more reactive than iron, yet there is less corrosion of aluminium when both are exposed to air.
Name the method by which aluminium metal is extracted.
Give the name and chemical formula of one ore of copper.
How is zinc extracted from its carbonate ore (calamine)? Explain with equations.
Then, zinc oxide is heated with carbon and zinc metal is produced.
Name two metals which occur in nature in free state as well as in combined state.
Name one ore of manganese. Which compound of manganese is present in this ore ? Also write its chemical formula.
A zinc ore on heating in air forms sulphur dioxide. Describe briefly any two stages involved in the conversion of this concentrated ore into zinc metal.
How does the method used for extracting a metal from its ore depend on the metal's position in the reactivity series? Explain with examples.
Explain giving one example, how highly reactive metals (which are high up in the reactivity series) are extracted.
Example: Sodium metal is extracted by the electrolytic reduction of molten sodium chloride. When electric current is passed through molten sodium chloride, it decomposes to form sodium metal and chlorine gas.
Describe with one example, how moderately reactive metals (which are in the middle of reactivity series) are extracted.
For example:- When Zinc sulphide (zinc blende ore) is strongly heated in air (roasted), it forms zinc oxide and sulphur dioxide. This process is called roasting. Then, zinc oxide is heated with carbon to form zinc metal. This process is termed as reduction.
How are the less reactive metals (which are quite low in the reactivity series) extracted ? Explain with the help of an example.
For example:- Mercury (II) sulphide ore is roasted in air when mercury (II) oxide is formed. When this mercury (II) oxide is heated to about 300oC, it decomposes to form mercury metal.
What is meant by refining of a metal ? Name the most widely used method for the refining of impure metals obtained by various reduction processes. Describe this method with the help of a labelled diagram by taking the example of any metal.
A small electric current is passed through the cell. Atoms from the anode enter the electrolyte. The copper from the anode gets converted into copper sulphide. An equal number of copper atoms from the solution get deposited on the cathode. This is to keep the concentration of the solution constant. Impurities from the anode block either remain in solution or collect below the anode, as they are unable to displace copper from the sulphate Solution. The insoluble impurities remain in the electrolyte and are called anode mud.
Copper sulphate solution contains ions of Cu++ and SO4--. The following reactions take place at the anode and cathode when an electric current is passed.
Pure copper is scraped or removed from the cathode. Anode becomes thinner as the electrolysis process proceeds. Some important metals like gold and silver are present in the anode mud. These can be recovered separately.
Define the terms (i) mineral (ii) ore, and (iii) gangue.
What is meant by the 'concentration of ore'?
Name one ore of copper (other than cuprite). Which compound of copper is present in this ore? Also, write its chemical formula.
Explain how, a reduction reaction of aluminium can be used for welding cracked machine parts of iron.Write a chemical equation for the reaction involved.
The chemical equation for the reaction involved is
What is corrosion ?
Name any two metals which do not corrode easily.
What is the corrosion of iron known as?
Explain why, aluminium is a highly reactive metal, still it is used to make utensils for cooking.
What is meant by 'rusting of iron'? With the help of labelled diagrams, describe an activity to find out the conditions under which iron rusts.
Experiment to show that rusting of Iron requires both, air and water: We take three test-tubes and put one clean iron nail in each of the three test-tubes:
In the first test-tube containing iron nail, we put some anhydrous calcium chloride and close its mouth with a tight cork. Anhydrous calcium chloride absorbs water moisture from the damp air present in the test-tube and make it dry. In this way, the iron nail in the first test-tube is kept in dry air (having no water vapour in it).
2) In the second test-tube containing iron nail, we put boiled distilled water. Boiled water does not contain any dissolved air (or oxygen) in it (this is because the process of boiling removes all the dissolved air from it). A layer of oil is put over boiled water in the test-tube to prevent the outside air from mixing with boiled water. In this way, the iron nail in the second test-tube is kept in air free boiled water.
3) In the third test-tube containing an iron nail, we put unboiled water so that about two-thirds of nail is immersed in water and the rest is above the water, exposed to damp air. In this way, the iron nail in the third test-tube has been placed in air and water together.
The mouth of all three test tubes is closed with a cork and it is kept aside for about one week.
After one week, we observe the iron nails kept in all the three test-tubes, one by one. We find that (i) No rust is seen on the surface of iron nail kept in dry air (water-free air) in the first test-tube. This tells us that rusting of iron does not take place in air alone.
(ii) No rust is seen on the surface of iron nail kept in air-free, boiled water in the second test-tube. This tells us that rusting of iron does not take place in water alone.
(iv) Red-brown rust is seen on the surface of iron nail kept in the presence of both air and water together the third test-tube. This tells us that rusting of iron takes place in the presence of both air and water together.
What is an alloy ? How is an alloy made?
What elements are present in steel? How are the properties of steel different from those of pure iron?
Give the constituents and one use of brass.
Name two metals which resist corrosion due to the formation of a thin, hard and impervious layer of oxide on their surface.
Name five methods of preventing rusting of iron.
1) painting
2) applying grease or oil
3) galvanization
4) Tin and chromium plating
5) Alloying to form stainless steel.
What are the constituents of stainless steel? What are the special properties of stainless steel?
Name an alloy of copper. State its chemical composition and any one use.
Explain why, when a copper object remains in damp air for a considerable time, a green coating is formed on its surface. What is this process known as?
How does the painting of an iron object prevent its rusting?
How does the electrical conductivity of copper alloys, brass and bronze, differ from that of pure copper ?
What is meant by 22 carat gold? Name the metals which are usually alloyed with gold to make it harder.
Explain giving equation, what happens when:(a) ZnC03 is heated in the absence of air?
(b) a mixture of Cu2O and Cu2S is heated?
ZnCO3→ ZnO + CO2
(b) 2Cu2O + Cu2S → 6Cu + SO2
Hence we can say that when a mixture of Cu2O and Cu2S is heated, carbon and Sulphur di oxide gas released.
For the reduction of a metal oxide, suggest a reducing agent other than carbon.
Explain why, an aqueous solution of sodium chloride is not used for the electrolytic extraction of sodium metal.
How are metals refined by the electrolytic process? Describe the electrolytic refining of copper with the help of a neat labelled diagram.
For the refining of an impure metal by the process of electrolysis, a thick block of impure metal is made anode (connected to +ve terminal of the battery) and a thin strip of the pure metal is made cathode (connected to -ve terminal of battery). A water soluble salt (of the metal to be refined) is taken as electrolyte. On passing current, impure metal dissolves from the anode and goes into the electrolyte Solution And pure metal from the electrolyte deposits on the cathode.
Electrolytic refining of copper: In an electrolytic tank, acidified copper sulphate (CuSO4+ dilute H2O4) solution forms the electrolyte. A block of impure copper is made into an anode by connecting the positive terminal of a power supply (battery). A thin strip of highly pure copper metal is the cathode of the cell. The negative terminal of the power supply is connected to it .
A small electric current is passed through the cell. Atoms from the anode enter the electrolyte. The copper from the anode gets converted into copper sulphide. An equal number of copper atoms from the solution get deposited on the cathode. This is to keep the concentration of the solution constant. Impurities from the anode block either remain in solution or collect below the anode, as they are unable to displace copper from the sulphate Solution. The insoluble impurities remain in the electrolyte and are called anode mud.
Copper sulphate solution contains ions of Cu++ and SO4--. The following reactions take place at the anode and cathode when an electric current is passed.
Pure copper is scraped or removed from the cathode. Anode becomes thinner as the electrolysis process proceeds. Some important metals like gold and silver are present in the anode mud. These can be recovered separately
Name the chemical compound which is electrolyzed in molten state to obtain aluminium metal. Which gas is evolved during this process ?
Name the chemical compound which is electrolyzed in molten state to obtain sodium metal. Which gas is produced in this process ?
Name the gas produced when calamine ore is calcined.
Name the gas evolved when cinnabar ore is roasted.
Name two metals which are found in nature mainly in the free state (as metallic elements).
Name two metals which are always found in combined state.
What iron compound is present in haematite ore? Also write its chemical formula.
What is the difference between a mineral and an ore?
Which metal is extracted from cinnabar ore?
Name one ore of sodium. Name the sodium compound present in this ore and write its chemical formula.
How is sodium metal extracted? Explain with the help of equation of the reaction involved.
Name three other metals which are extracted in a manner similar to sodium.
Name the metal which is extracted from haematite ore.
Name one ore of aluminium. Name the aluminium compound present in this ore and write its chemical formula.
How is aluminium metal extracted? Explain with the help of an equation.
2Al2O3(l) � 4Al(s) + 3O2(g)
Name the electrode at which aluminium metal is produced.
Which gas is produced during the extraction of aluminium? At which electrode is this gas produced?
Give the name of one ore of iron. Which iron compound is present in this ore ? Write its chemical formula.
Describe the extraction of zinc metal from its sulphide ore (zinc blende). Write equations of the reactions involved.
2ZnS(s) + 3O2(g) -> 2ZnO(g) + 2SO2(g)
Then, zinc oxide is heatd with carbonto form zinc metal. This process is termed as reduction
Zn(s) + C(s) -> Zn(s) + CO(g)
Explain why, the galvanized iron article is protected against rusting even if the zinc layer is broken.
Name a common metal which is highly resistant to corrosion.
Which metal is extracted from bauxite ore?
Name the metal which is extracted from the ore called 'rock salt'.
Name two ores of zinc. Write the names of the chemical compounds present in them and give their chemical formulae.
i) Calamine: Zinc Carbonate (ZnCO3)
ii) Zinc Blende (ZnS)
Explain how, mercury is extracted from its sulphide ore (cinnabar). Give equations of the reactions involved.
2HgS(s) + 3O2(g) -> 2HgO(s) + 2SO2(g)
Then, Mercury (II) Oxide is heated to about 300oC and it undergoes decomposition to form mercury metal.
In the electrolytic refining of a metal M, what would you take as anode, cathode and electrolyte?
Name any five metals which are purified by electrolytic refining method.
Which metal is extracted from calamine ore?
Name one ore of mercury. Which mercury compound is present in this ore? Write its chemical formula.
How is copper extracted from its sulphide ore (copper glance), Cu2S? Explain with equations of the reactions involved.
2Cu2S(s) + 3O2(g) -> 2Cu2O(s) + 2SO2(g)
When a good amount of copper(I) oxide is formed, then the supply of air for roasting stopped. In the absence of air, copper(I) oxide reacts with remaining copper(I) sulphide to form copper metal and sulphur di oxide.
2Cu2O(s) + Cu2S(s) -> 6Cu(s) + SO2(g)
What is an alloy? Give two examples of alloys.
How are the properties of an alloy different from those of the constitutent elements?
ii) Alloys are harder than the constituent metals.
iii) Alloys are more resistant to corrosion.
iv) Alloys have lower melting point than constituents metals.
v) Alloys have lower electrical conductivity than pure metals.
An ore of manganese metal is: A. bauxiteB. hematite
C. cuprite
D. pyrolusite
Which of the following is an iron ore? A. cinnabarB. calamine
C. Hematite
D. rock salt
The metal which can be extracted from the bauxite ore is: A. NaB. Mn
C. Al
D. Hg
The two metals which can be extracted just by heating their sulphides in air are : A. sodium and copperB. copper and aluminium
C. potassium and zinc
D. mercury and copper
A common metal which is highly resistant to corrosion is : A. ironB. copper
C. aluminium
D. magnesium
An important ore of zinc metal is: A. calamineB. cuprite
C. pyrolusite
D. haematite
The major ore of aluminium is known as: A. cinnabarB. calamine
C. bauxite
D. pyrolusite
The two metals which are extracted by means of electrolytic reduction of their molten salts are : A. magnesium and manganeseB. iron and aluminium
C. zinc and magnesium
D. magnesium and aluminium
In stainless steel alloy, iron metal is mixed with A. Cu and CrB. Cr and Ni
C. Cr and Sn
D. Cu and Ni
If copper is kept exposed to damp air for a considerable time, it gets a green coating on its surface. This is due to the formation of: A. hydrated copper sulphateB. copper oxide
C. basic copper carbonate
D. copper nitrate
Which of the following alloys contains mercury as one of the constituents? A. stainless steelB. solder
C. duralumin
D. zinc amalgam
Which of the following is an ore of mercury metal?Options||A. rock salt
B. cinnabar
C. calamine
D. haematite
Calamine ore can be used to extract one of the following metals. This metal is: A. copperB. mercury
C. aluminium
D. zinc
Which of the following pair of metals exists in their native state in nature? A. Ag and HgB. Ag and Zn
C. Au and Hg
D. Au and Ag
Which of the following reactants are used to carry out the thermite reaction required for welding the broken railway tracks? A. Al2O3 + FeB. MnO2 + Al
C. Fe2O3 + Al
D. Cu2O + Fe
Which of the following alloys contains a non-metal as one of the constituents? A. brassB. amalgam
C. steel
D. bronze
During the refining of an impure metal by electrolysis, the pure metal is a deposited: A. at cathodeB. on the walls of electrolytic tank
C. at anode
D. at the bottom of electrolytic tank
Which of the following metals can be obtained from haematite ore? A. copperB. sodium
C. zinc
D. iron
Brass is an alloy of: A. Cu and SnB. Cu and Pb
C. Pb and Sn
D. Zn and Cu
The metal which is always present in an amalgam is : A. ironB. aluminium
C. mercury
D. magnesium
Manganese metal is extracted from manganese dioxide by a reduction process by making use of: A. carbonB. hydrogen
C. electrolysis
D. aluminium
The metal which can be extracted simply by heating the cinnabar ore in air is: A. ZnB. Cu
C. Al
D. Hg
During galvanization, iron metal is given a thin coating of one of the following metals. This metal is: A. chromiumB. tin
C. zinc
D. copper
Which of the following metals are extracted by the electrolysis of their molten chlorides? A. Na and HgB. Hg and Mg
C. Na and Mg
D. Cu and Fe
Rock salt is an ore of one of the following metals. This metal is : A. MnB. Na
C. Fe
D. Cu
The articles made of silver metal become dark on prolonged exposure to air. This is due to the formation of a layer of its : A. oxideB. hydride
C. sulphide
D. carbonate
A sulphide ore is converted into metal oxide by the process of : A. carbonationB. roasting
C. calcination
D. anodizing
The metal which can be extracted from pyrolusite ore is : A. mercuryB. manganese
C. aluminium
D. magnesium
Calamine ore can be converted into zinc oxide by the process of : A. dehydrationB. roasting
C. calcination
D. sulphonation
Zinc blende ore can be converted into zinc oxide by the process of : A. roastingB. hydrogenation
C. chlorination
D. calcination
An element A which is a part of common salt and kept under kerosene reacts with another element B of atomic number 17 to give a product C. When an aqueous solution of product C is electrolyzed then a compound D is formed and two gases are liberated.(a) What are A and B?
(b) Identify C and D.
(c) What will be the action of C on litmus solution? Why?
(d) State whether element B is a solid, liquid or gas at room temperature.
(e) Write formula of the compound formed when element B reacts with an element E having atomic number 5.
(b) Here element C is sodium chloride and element D is sodium hydroxide.
(c) Element C will turn the litmus solution blue. Because a basic element will turn the litmus solution blue.
(d) From the above given statement we can say the element B is a gas.
(e) The formula of the compound formed when element B reacts with an element E having atomic number 5 is EB3.
A metal which exists as a liquid at room temperature is obtained by heating its sulphide ore in the presence of air.(a) Name the metal and write its chemical symbol.
(b) Write the name and formula of the sulphide ore.
(c) Give the equations of chemical reactions involved in the production of metal from its sulphide ore.
(d) Name a common 'device in which this metal is used.
(e) Can this metal displace copper from copper sulphate solution? Why?
(b) The name and formula of the sulphide ore is Cinnabar and HgS.
(c) The equations of chemical reactions involved in the production of metal from its sulphide ore is
(d) Mercury is used in thermometer.
(e) Mercury cannot displace copper from copper sulphate solution because it is less reactive then copper.
No chemical reaction takes place when granules of a rusty-brown solid A are mixed with the powder of another solid B. However, when the mixture is heated, a reaction takes place between its components. One of the products C is a metal and settles down in the molten state while the other product D floats over it. It was observed that the reaction is highly exothermic.(a) What could the solids A and B be?
(b) What are the products C and D most likely to be?
(c) Write the chemical equation for the reaction between A and B leading to the formation of C and D.
(d) What is the special name of such a reaction? State one use of such a reaction.
(e) Name any two types of chemical reactions under which the above reaction can be classified.
(b) The products C and D most likely to be iron and aluminium oxide respectively.
(c) The chemical equation for the reaction between A and B leading to the formation of C and D is like
Mention the physical states of all the reactants and products in this equation and indicate the heat change which takes place.
(d) The special name of such a reaction is Thermite reaction. One use of such a reaction is in Welding of broken pieces of heavy iron objects like railway tracks, etc.
(e) The two types of chemical reactions under which the above reaction can be classified are displacement reactions and Oxidation-reduction reactions.
In an electrolytic tank, aluminium metal is being extracted by the electrolysis of molten aluminium oxide using carbon electrodes. It is observed that one of the carbon electrodes is gradually burnt away and has to be replaced.(a) Which carbon electrode (cathode or anode) is burnt away?
(b) Why is this carbon electrode burnt away?
(b) The carbon electrode is burnt away because oxygen produced during the electrolysis of molten aluminium oxide reacts gradually with the carbon of carbon anode to form carbon dioxide gas.
A metal X which is resistant to corrosion is produced by the electrolysis of its molten oxide whereas another metal Y which is also resistant to corrosion is produced by the reduction of its oxide with carbon. Metal X can be used in powder form in thermite welding whereas metal Y is used in making cathodes of ordinary dry cells.(a) Name the metals X and Y.
(b) Which of the two metals is more reactive: X or Y?
(c) Name one ore or metal X. Also write its chemical formula.
(d) Name one ore of metal Y. Also write its chemical formula.
(e) Name one alloy of metal X and one alloy of metal Y.
(b) Among the two metals X and Y, X is more reactive then that of the Y.
(c) the name of the ore is Bauxite and its chemical formula is Al2O3.2H2O.
(d) The name of the ore of metal Y is Calamine and its chemical formula is ZnCO3.
(e) The name of the alloy of metal X is Duralumin and the name of the alloy of metal Y is Brass.
When an object made of metal A is kept in air for a considerable time, it loses its shine and becomes almost black due to the formation of a layer of substance B. When an object made of another metal C is kept in damp air for a considerable time, it gets covered with a green layer of substance D. Metal A is the best conductor of electricity whereas metal C is the next best conductor of electricity.(a) What is metal A?
(b) What is metal C?
(c) Name the substance B.
(d) Name the substance D.
(e) What type of chemical can be used to remove the green layer from metal C and clean it? Why?
(b) The name of the metal C is copper.
(c) The name of the substance is silver sulphide.
(d) The name of the substance D is basic copper carbonate.
(e) Dilute acidic solution can be used to remove the green layer from metal C and clean it because the acid solution dissolves green coloured basic copper carbonate present on the corroded copper object makes it look shiny, red brown again.
Four metals P, Q R and S are all obtained by the reduction of their oxides with carbon. Metal P is used to form a thin layer over the sheets of metal S to prevent its corrosion. Metal Q is used for electroplating tiffin boxes made of metal S whereas metal R is used in making car batteries. Metals Q and R form an alloy called solder. What are metals P, Q R and S? How have you arrived at this conclusion?
A black metal oxide X02 is used as a catalyst in the preparation of oxygen gas from potassium chlorate. The oxide XO2 is also used in ordinary dry cells. The metal oxide XO2 cannot be reduced satisfactorily with carbon to form metal X.(a) Name the metal X.
(b) Name the metal oxide XO2
(c) Which reducing agent can be used to reduce XO2 to obtain metal X?
(d) Name another metal which can also be extracted by the reduction of its oxide with the above reducing agent.
(b) The name of the metal oxide XO2 is Manganese dioxide.
(c) Aluminium can be used as a reducing agent to reduce XO2 to obtain metal X.
(d) The another metal which can also be extracted by the reduction of its oxide with the above reducing agent is chromium.
Metals X and Y can be recovered from the anode mud left behind after the electrolytic refining of copper metal. The coins made of metal X look new even after several years of use but the coins made of metal Y lose their shine gradually and get blackened soon. When metal X is alloyed with a small amount of metal Y, it becomes hard and hence suitable for making ornaments. What are metals X and Y? Also state the colour of metal X.
What is metal by saying that the metals are malleable and ductile ?Explain with examples.
Ductility of metal means they can be drawn into thin wires. It can be seen in Copper.
Name two metals which are both malleable and ductile.
Which property of iron metal is utilized in producing iron sheets required for making buckets?
Which property of copper metal is utilized in making thin wires?
Name two metals which react violently with cold water. Write any three observations you would make when such a metal is dropped into water. How would you identify the gas evolved, if any, during the reaction?
1) Little explosions takes place on the surface of water and ultimately catches fire as the metal moves to the surface of water.
2) A pop sound is produced indicating that it is hydrogen.
With the help of examples, describe how metal oxides differ from non-metal oxides.
Whereas non-metals are acidic in nature. That is why they turn blue litmus red. For example: carbon dioxide when tested on litmus paper they turn blue litmus red.
Which of the following elements would yield:(i) an acidic oxide,
(ii) a basic oxide, and
(iii) a neutral oxide?
(i) The element which yield an acidic oxide are S,C.
(ii) The element which yield a basic oxide are Na,K.
(iii)The element which yield a neutral oxide is H.
Na, S, C, K, H
What are amphoteric oxides? Give two examples of amphoteric oxides.
Choose the acidic oxides, basic oxides and neutral oxides from the following:Na2O; CO2; CO; SO2; ; N2O; H2O.
Na2O, and MgO are basic oxides.
H2O is the neutral oxide.
Which of the following are amphoteric oxides:MgO, ZnO, P2O3, Al2O3, NO2
What is the nature of the oxide SO2 ? What happens when it is dissolved in water? Write the chemical equation of the reaction involved.
What is the nature of the oxide Na2O? What happens when it is dissolved in water? Write the chemical equation of the reaction involved.
What type of oxides are formed when non-metals react with oxygen? Explain with an example.
Example: Carbon Dioxide which is acidic in nature is formed when Carbon reacts with Oxygen. A neutral Oxide is formed by the reaction of Hydrogen and Oxygen which is known as water.
What type of oxides are formed when metals combine with oxygen? Explain with the help of an example.
Example: when Sodium reacts with Oxygen then it forms Sodium Oxide which is basic in nature.
Explain why, metals usually do not liberate hydrogen gas with dilute nitric acid.
Name two metals which can, however, liberate hydrogen gas from very dilute nitric acid.
How do metals react with hydrogen? Explain with an example.
How do non-metals react with hydrogen? Explain with an example.
What happens when calcium reacts with chlorine? Write an equation for the reaction which takes place.
What happens when magnesium reacts with very dilute nitric acid? Write an equation for the reaction involved.
Arrange the following metals in order of their chemical reactivity, placing the most reactive metal first: Magnesium, Copper, Iron, Sodium, Zinc, Lead, Calcium.
What happens when a rod of zinc metal is dipped into a solution of copper sulphate? Give chemical equation of the reaction involved.
A copper plate was dipped in AgN03 Solution. After certain time, silver from the solution was deposited on the copper plate. State the reason why it happened. Give the chemical equation of the reaction involved.
State five uses of metals and five of non-metals.
1) for making car batteries lead metal is used.
2) To protect iron from rusting galvanization is used with the help of Zinc metal.
3) To make utensils Iron, copper and aluminium metals are used.
4) To make electrical wires metals like copper and aluminium are used.
5) For packaging of materials aluminium foil is being used and they are of aluminium metal.
Five uses of non-metals are:-
1) for the hydrogenation of vegetable oil is done with the use of hydrogen.
2) To make the electrodes of electric cells and dry cell carbon is used.
3) In the manufacturing of ammonia, nitric acid and fertilizers nitrogen is used.
4) As a rocket fuel liquid hydrogen is being used.
5) For the production of sulphuric acid sulphur is used.
State one use each of the following metals: Copper, Aluminium, Iron, Silver, Gold, Mercury
Aluminium:- for the packaging of food aluminium foil is used.
Iron:- utensils are manufactured by the iron.
Silver:- to make jewelry silver is being used.
Gold:- for the purpose of jewelry making gold is used.
Mercury:- in thermometers mercury is being used.
State one use each of the following non-metals: Hydrogen, Carbon (as Graphite), Nitrogen, Sulphur
Carbon (as graphite):- for the making of electrodes of the electric cell and dry cell carbon (as graphite) is used.
Nitrogen:- In the manufacturing of ammonia, nitric acid and fertilizers nitrogen is used.
Sulphur:- to prepare sulphuric acid sulphur is used.
Name the metal which is used in making thermometers.
Why does aluminium not react with water under ordinary conditions?
Name two metals which can displace hydrogen from dilute acids.
Name two metals which cannot displace hydrogen from dilute acids.
Why is sodium kept immersed in kerosene oil?
Why is white phosphorus kept immersed under water?
Can we keep sodium immersed under water? Why?
Describe the reaction of potassium with water. Write the equation of the reaction involved.
Write an equation of the reaction of iron with steam. Indicate the physical states of all the reactants and products.
Which gas is produced when dilute hydrochloric acid is added to a reactive metal?
Give one example, with equation, of the displacement of hydrogen by a metal from an acid.
Name two metals (other than zinc and iron) which can displace hydrogen from dilute hydrochloric acid?
What is the action of water on(a) sodium
(b) magnesium, and
(c) aluminium? Write equations of the chemical reactions involved.
(a) Sodium vigorously reacts with cold water to form sodium hydroxide and hydrogen gas.
(b) When magnesium reacts with hot water it gives magnesium hydroxide and hydrogen gas.
(c) Aluminium reacts with the steam to give aluminium oxide and also produces hydrogen gas.
You are given samples of three metals-sodium, magnesium and copper. Suggest any two activities to arrange them in order of their decreasing reactivities.
1) When sodium, magnesium and copper are left in air, sodium reacts instantly with oxygen to form sodium oxide as it is a very reactive metal, magnesium reacts with oxygen to form magnesium oxide only on heating, whereas copper does not burn in air even on strong heating. It reacts only when the heating is done for a long time. By this we can say that sodium is most reactive, then magnesium and copper is the least reactive among the given three.
2) When Sodium reacts instantly with cold water it forms sodium hydroxide and hydrogen, magnesium does not react with cold water but it reacts with hot water to form magnesium hydroxide and hydrogen gas but on the other hand copper do not react even with steam. This shows that sodium is highly reactive; magnesium is less reactive than sodium and copper is the least reactive among the three.
Write one reaction in which aluminium oxide behaves as a basic oxide and another in which it behaves as an acidic oxide.
Whereas, on the other hand, aluminium oxide behaves as an acidic oxide because it reacts with a base to form salt and water.
What special name is given to substances like aluminium oxide.
Name another metal oxide which behaves like aluminium oxide.
What happens when calcium reacts with water ? Write the chemical equation of the reaction of calcium with water.
Write the chemical equation of the reaction which takes place when iron reacts with dilute sulphuric acid. What happens when the gas produced is ignited with a burning matchstick?
You are given a dry cell, a torch bulb with holder, wires and crocodile clips. How would you use them to distinguish between samples of metals and non-metals?
State any five physical properties of metals and five physical properties of non-metals.
1) metals are malleable, which mean metals can be beaten into thin sheets.
2) Property of ductility, which mean metals can be drawn into thin wires.
3) Metals are lustrous.
4) Property of hardness.
5) Property of conductivity, metals are good conductor of electricity and heat.
Five property of non-metals.
1) Generally non-metals are soft in nature.
2) Non-metals are bad conductor of heat and electricity, as they do not allow the flow of electricity or heat through them
3) Non-metals are not ductile in nature.
4) Non-metals cannot be beaten into thin sheets.
5) Non-metals do not have the property of luster.
Name two physical properties each of sodium and carbon in which their behaviour is not as expected from their classification as metal and non-metal respectively.
Name two metals whose melting points are so low that they melt when held in the hand.
Metals are said to be shiny. Why do metals generally appear to be dull? How can their brightness be restored?
What are metals? Name five metals.
Name a metal which is so soft that it can be cut with a knife.
Name the metal which is the best conductor of heat and electricity.
What happens when a metal reacts with dilute hydrochloric acid? Explain with the help of an example.
Example:- Magnesium chloride and hydrogen gas are formed when the metal magnesium react with dilute hydrochloric acid.
Write the equations for the reactions of:(i) Magnesium with dilute hydrochloric acid
(ii) Aluminium with dilute hydrochloric acid
(iii) Zinc with dilute hydrochloric acid
(iv) Iron with dilute hydrochloric acid
(i) the product formed by the reaction of magnesium and hydrochloric acid are magnesium chloride and hydrogen.
(ii)the product formed by the reaction of aluminium with hydrochloric acid are aluminium chloride and hydrogen.
(iii)the product formed by the reaction of Zinc with dilute hydrochloric acid are zinc chloride and hydrogen.
(iv)the product formed by the reaction of Iron with dilute hydrochloric acid are Iron chloride and hydrogen.
Name the products formed in each case. Also indicate the physical states of all the substances involved.
Define non-metals. Give five examples of non-metals.
Name a non-metal which conducts electricity.
Name a non-metal having luster (shining surface).
Name a non-metal which is extremely hard.
How do non-metals react with oxygen? Explain with an example. Give equation of the reaction involved.What is the nature of the product formed? How will you demonstrate it?
What is meant by the reactivity series of metals? Arrange the following metals in an increasing order of their reactivity towards water:Zinc, Iron, Magnesium, Sodium
Hydrogen is not a metal but still it has been assigned a place in the reactivity series of metals. Why?
Name one metal more reactive and another less reactive than hydrogen.
Name one metal which displaces copper from copper sulphate solution and one which does not.
Name one metal which displaces silver from silver nitrate solution and one which does not.
State any three differences between the physical properties of metals and non-metals.
Property of metal:-
1) Metals are malleable i.e. they can be beaten into thin sheets with a hammer.
2) Metals are ductile i.e. they can be drawn into thin wires.
3) Metals are good conductors of heat and electricity.
Property of non-metal:-
1) Non-metals are non-malleable i.e. they cannot be beaten into thin sheets with a hammer.
2) Non-metals are non-ductile i.e. they cannot be drawn into thin wires.
3) Non-metals are bad conductors of heat and electricity.
State three reasons (of which at least one must be chemical) for believing that sulphur is a non- metal.
Three reasons (of which at least one must be chemical) for believing that sulphur is a non- metal are:-
1) sulphur is brittle and non-ductile in nature.
2) Sulphur is a non-conductor of electricity.
3) Sulpher forms acidic oxides.
Which non-metal has been placed in the reactivity series of metals?
The elements whose oxides can turn phenolphthalein solution pink are: A. Na and KB. K and C
C. Na and S
D. K and P
"Is malleable and ductile". This best describes: A. a metalB. a compound
C. a non-metal
D. a solution
One of the following is not a neutral oxide. This is: A. COB. H20
C. N20
D. Na2O
A basic oxide will be formed by the element: A. KB. S
C. p
D. Kr
An acidic oxide is produced by the element: A. NaB. C
C. Ca
D. H
You are given a solution of AgN03. Which of the following do you think cannot displace Ag from AgN03 solution? A. MagnesiumB. Zinc
C. Gold
D. Copper
Out of aluminium, copper, calcium and tin, the most reactive metal is: aluminiumB. copper
C. tin
D. calcium
The least reactive metal among the following is: A. sodiumB. silver
C. copper
D. lead
An element X reacts with hydrogen, when heated, to form a covalent hydride H2X. If H2X has a smell of rotten eggs, the element X is likely to be: A. carbonB. sulphur
C. chlorine
D. phosphorus
Out of the following oxides, the amphoteric oxide is: A. Fe203B. Al203
C. P2O5
D. N2O
The metals which can produce amphoteric oxides are: A. sodium and aluminiumB. zinc and potassium
C. calcium and sodium
D. aluminium and zinc
An element X forms two oxides XO and XO2. The oxide XO is neutral but XO2 is acidic in nature. The element X is most likely to be : A. sulphurB. carbon
C. calcium
D. hydrogen
The elements whose oxides can turn litmus solution blue are: A. carbon and sulphurB. sodium and carbon
C. potassium and magnesium
D. magnesium and sulphur
The elements whose oxides can turn litmus solution red are : A. lithium and sodiumB. copper and potassium
C. carbon and hydrogen
D. phosphorus and sulphur
Zinc oxide is a metal oxide. Which of the following term best describes the nature of zinc oxide : A. an acidic oxideB. a basic oxide
C. an amphoteric oxide
D. a neutral oxide
A metal less reactive and another metal more reactive than hydrogen are : A. aluminium and leadB. iron and magnesium
C. copper and tin
D. copper and mercury
An element E reacts with water to form a solution which turns phenolphthalein solution pink. The element E is most likely to be : A. SB. Ca
C. C
D. Ag
An element reacts with oxygen to give a compound with a high melting point. This compound is also soluble in water. The element is likely to be: A. calciumB. carbon
C. silicon
D. iron
Which one of the following four metals would be displaced from the solution of its salt by the other three metals? A. ZnB. Ag
C. Cu
D. Mg
An element is soft and can be cut with a knife. It is very reactive and cannot be kept open in the air. It reacts vigorously with water. The element is most likely to be: A. MgB. S
C. P
D. Na
Which of the following metal exists in the liquid state? A. NaB. Ag
C. Cr
D. Hg
Which of the following non-metal is a liquid? A. carbonB. sulphur
C. bromine
D. iodine
Which of the following pair of reactants can undergo a displacement reaction under appropriate conditions? A. MgSO4 + FeB. ZnSO4 + Fe
C. MgSO4 + Pb
D. CuSO4 + Fe
An element E forms an oxide E2O. An aqueous solution of E2O turns red litmus paper blue.(a) What is the nature of the oxide E2O?
(b) State whether element E is a metal or a non-metal.
(c) Give one example of an element like E.
(a) An element E forms an oxide E2O. An aqueous solution of E2O turns red litmus paper blue. The nature of the oxide E2O is basic.
(b) Element E is a metal.
(c) One example of an element like E is sodium (Na).
Metal A burns in air, on heating, to form an oxide A2O3 whereas another metal B burns in air only on strong heating to form an oxide BO. The two oxides A2O3 and BO can react with hydrochloric acid as well as sodium hydroxide solution to form the corresponding salts and water.(a) What is the nature of oxide A2O3?
(b) What is the nature of oxide BO?
(c) Name one metal like A.
(d) Name one metal like B.
(a) Amphoteric oxide is the nature of oxide A2O3.
(b) The nature of oxide BO is amphoteric.
(c) One metal like A is aluminium (Al).
(d) One metal like B is Zinc (Zn).
An element X forms two oxides XO and XO2. The oxide XO has no action on litmus solution but oxide XO2 turns litmus solution O red.(a) What is the nature of oxide XO ?
(b) What is the nature of oxide XO2?
(c) Would you call element X a metal or a non-metal? Give reason for your choice.
(a) Neutral oxide is the nature of oxide XO.
(b) The nature of oxide XO2 is acidic.
(c) Element X is a non-metal as it also forms an acidic oxide.
State and explain the reactions, if any, of the following metals with a solution of copper sulphate:(a) Gold
(b) Copper
(c) Zinc
(d) Mercury
Solution|||
(a) no displacement reaction will take place with the solution of copper sulphate, as gold is less reactive then the copper.
(b) there will not be any reaction between copper and copper sulphate.
(c) copper will be replaced by zinc from the copper sulphate
(d) in case of mercury no displacement reaction will take place as mercury is less reactive then copper.
Give the names and formulae of one metal chloride and one non- metal chloride.
The name of a non-metal chloride is carbon tetrachloride and its formula is CCl.
State an important property in which these metal chloride and non-metal chloride differ.
Why do they differ in this property?
In a solution of lead acetate, a strip of metal M was dipped. After some time, lead from the solution was deposited on the metal strip. Which metal is more reactive, M or lead?
CuSO4 (aq) + Fe (s) → FeSO4 (aq) + Cu (s)FeSO4 (aq) + Zn (s) → ZnSO4 (aq) + Fe (s)
On the basis of the above reactions, indicate which is most reactive and which is least reactive metal out of zinc, copper and iron.
Which of the following reactions will not occur ? Why not?(a) MgSO4 (aq) + Cu (s) → CuSO4 (aq) + Mg (s)
(b) CuSO4 (aq) + Fe (s) → FeSO4 (aq) + Cu (s)
(c) MgSO4 (aq) + Fe (s) → FeSO4 (aq) + Mg (s)
(a) MgSO4 (aq) + Cu (s) CuSO4 (aq) + Mg (s), will not occur. Because copper is less reactive then Mg.
(c) MgSO4 (aq) + Fe (s FeSO4 (aq) + Mg (s), will also not occur. Because Fe is less reactive then Mg. (in both case more reactive metal is being displaced by a less reactive metal, which is not possible).
In nature, metal A is found in a free state while metal B is found in the form of its compounds. Which of these two will be nearer to the top of the activity series of metals?
If A, B1 C, D, E, F, G, H, I, J and K represent metals in the decreasing order of their reactivity, which one of them is most likely to occur in a free state in nature?
Name a metal for each case:(i) It does not react with cold as well as hot water but reacts with steam.
(ii) It does not react with any physical state of water.
(i) iron do not react with cold as well as hot water but reacts with steam
(ii) Copper do not react with any physical state of water.
When calcium metal is added to water, the gas evolved does not catch fire but the same gas evolved on adding sodium metal to water catches fire. Why is it so?
A zinc plate was kept in a glass container having CuS04 Solution. On examining it was found that the blue colour of the solution is getting lighter and lighter. After a few days, when the zinc plate was taken out of the solution, a number of small holes were noticed in it. State the reason and give chemical equation of the reaction involved.
What is the name of the chemical bond formed:(a) by the sharing of electrons between two atoms?
(b) by the transfer of electrons from one atom to another?
(b) The name of the chemical bond formed by the transfer of electrons from one atom to another is known as ionic bond.
Name a carbon containing molecule which has two double bonds.
Carbon dioxide, CO2 is a carbon containing molecule which has two double bonds.
What would be the electron-dot structure of carbon dioxide which has the formula CO2?
What type of chemical bond is formed between:(a) potassium and bromine?
(b) carbon and bromine?
(a) The chemical bond which is formed between potassium and bromine is ionic bond.
(b) The chemical bond which is formed between carbon and bromine covalent bond.
What do we call those particles which have more or less electrons than the normal atoms?
What do we call those particles which have more electrons than the normal atoms ?
What do we call those particles which have less electrons than the normal atoms?
The atomic number of sodium is 11. What is the number of electrons in Na+?
The atomic number of chlorine is 17. What is the number of electrons in CI-?
The atomic number of an element X is 8 and that of element Y is 12. Write downthe symbols of the ions you would expect to be formed from their atoms.
Write down the electronic configuration of(i) sulphur atom, and
(ii) sulphide ion. (At. No. of S = 16)
i) The electronic configuration of sulphur atom is 2, 8, 6.
ii) The electronic configuration of sulphide ion 2, 8, 8.
Write down the electronic configuration of(i) magnesium atom, and
(ii) magnesium ion. (At. No. of Mg = 12)
i) The electronic configuration of magnesium atom is 2, 8, 2.
ii) The electronic configuration of magnesium ion is 2, 8.
What type of chemical bonds are present in a solid compound which has a high melting point, does not conduct electricity in the solid state but becomes a good conductor in the molten state ?
State whether the following statement is true or false:The aqueous solution of an ionic compound conducts electricity because there are plenty of free electrons in the
The aqueous solution of an ionic compound conducts electricity because there are plenty of free ions in the Solution.
What type of bonds are present in hydrogen chloride and oxygen?
Write the electron-dot structures for the following molecules:(i) NaCl
(ii) Cl2
i) The electron-dot structure of NaCl is
ii) The electron-dot structure of Cl2 is
What type of bonds are present in water molecule? Draw the electron- dot structure of water (H2O).
What type of Bonds are present in methane (C) and sodium chloride (NaCl)?
State one major difference between covalent and ionic bonds and give one example each of covalent and ionic compounds.
Which inert gas electron configuration do the Cl atoms in Cl2 molecule resemble ? What is this electron configuration?
Which of the following compounds are ionic and which are covalent?Urea, Cane sugar, Hydrogen chloride, Sodium chloride, Ammonium chloride, Carbon tetrachloride, Ammonia, Alcohol, Magnesium chloride.
Sodium chloride, Ammonium chloride, Magnesium chloride.
The covalent compounds are:-
Urea, Cane sugar, Hydrogen chloride, Carbon tetrachloride, Ammonia, Alcohol.
Give one example each of the following:(i) A molecule containing a single covalent bond
(ii) A molecule containing a double covalent bond
(iii) A molecule containing a triple covalent bond
(iv) A compound containing an ionic bond
(i) one example of a molecule containing a single covalent bond is hydrogen.
(ii) one example of a molecule containing a double covalent bond is oxygen.
(iii) one example of a molecule containing a triple covalent bond is nitrogen.
(iv) one example of a molecule containing an ionic bond is sodium chloride.
Fill in the blanks in the following sentences:(i) Two atoms of the same element combine to form a molecule. The bond between them is known as .......... bond.
(ii) Two chlorine atoms combine to form a molecule. The bond between them is known as ..........
(iii) In forming oxygen molecule, .......... electrons are shared by each atom of oxygen.
(iv) In forming N2 molecule, .......... electrons are shared by each atom of nitrogen.
(v) The number of single covalent bonds in C2H2 molecule are ...............
(vi) Melting points and boiling points of ionic compounds are generally ........than those of covalent compounds.
(i) Two atoms of the same element combine to form a molecule. The bond between them is known as covalent bond.
(ii) Two chlorine atoms combine to form a molecule. The bond between them is known as covalent.
(iii) In forming oxygen molecule, two electrons are shared by each atom of oxygen.
(iv) In forming N2 molecule, three electrons are shared by each atom of nitrogen.
(vi) The number of single covalent bonds in C2H2 molecule are two.
(vi) Melting points and boiling points of ionic compounds are generally higher than those of covalent compounds.
What is a covalent bond? What type of bond exists in (i) CCl4, and (ii) CaCl2?
What is the nature of charge on (i) a cation, and (ii) an anion?
i) Cations are positively charged.
ii) Anions are negatively charged.
What is an ionic bond? What type of bond is present in oxygen molecule?
Every ionic chemical bond is made up of at least one cation and one anion.
Double bond is present in oxygen.
What is an ion? Explain with examples.
Example: Sodium ion Na+, Chlorine ion Cl-.
Name the cation and anion present in MgCl2 Also write their symbols.
What type of chemical bond is present in chlorine molecule? Explain your answer.
Explain the formation of a chlorine molecule on the basis of electronic theory of valency.
Giving one example each, state what are (i) ionic compounds, and (ii)covalent compounds.
(ii) those compounds which have covalent bonds are known as covalent compound. These compounds are formed by sharing of electrons between atoms. For example: methane, CH4.
Compare the properties of ionic compounds and covalent compounds.
Ionic compound covalent compound
Explain why: covalent compounds have generally low melting points.
Explain why:ionic compounds have generally high melting points.
Give two general properties of ionic compounds and two those of covalent compounds.
1) the melting and boiling points of ionic compounds are very high.
2) Ionic compounds are soluble in water.
Two properties of covalent bonds are:-
1) Covalent compounds have low melting points.
2) Covalent compounds do not dissolve in water.
State one test by which sodium chloride can be distinguished from sugar.
Explain why, ionic compounds conduct electricity in solution whereas covalent compounds do not conduct electricity.
Which of the following will conduct electricity and which not?MgCl2, CCl4, NaCl, CS2, Na2S Give reasons for your choice.
MgCl2, NaCl, Na2S (Ionic compounds)
Non-conductor of electricity:-
CCl4, CS2 (Covalent compounds).
Name one ionic compound containing chlorine and one covalent compound containing chlorine.
Covalent compound containing chlorine:- Carbon tetrachloride, CCI4
How will you find out which of the water soluble compound A or B is ionic?
Explain why, a solution of cane sugar does not conduct electricity but a solution of common salt is a good conductor of electricity.
Give the formulae of the compounds that would be formed by the combination of the following pairs of elements:(a) Mg and N2
(b) Al and Cl2
(c) Li and O2
(d) K and H
�
(a) Mg3N2. Is the formula for Mg and N2 combination.
(b) AlCl3. Is the formula of Al and Cl2 combination.
(c) Li2O is the formula obtained by the combination of Li and O2.
(d) KH is the formula obtained by the combination of K and H.
What are noble gases ? What is the characteristic of the electronic configuration of noble gases?
What is the cause of chemical bonding (or chemical combination) of atoms of elements?
(i) Write electron-dot structures for magnesium and oxygen.(ii) Show the formation of MgO by the transfer of electrons.
(iii) What are the ions present in this compound?
(i) The electron-dot structure of the magnesium is likely to be
The electron-dot structure of the oxygen is likely to be
(ii) the formation of MgO by the transfer of electrons can be shown by
(iii)The ions present in this compound are both negative as well as positive ions which are O2- and Mg2+.
Draw the electron-dot structure of a hydrogen chloride molecule:(i) Which inert gas does the H atom in HCl resemble in electron arrangement?
(ii) Which inert gas does the Cl atom in HCl resemble in electron arrangement?
(ii) The Cl atom in HCl resembles argon in electron arrangement.
What type of bonding would you expect between the following pairs of elements ?(i) Calcium and Oxygen
(ii) Carbon and Chlorine
(iii) Hydrogen and Chlorine
(i) Calcium and Oxygen shares ionic bonding.
(ii) Carbon and Chlorine shares the covalent bonding.
(iii) Hydrogen and Chlorine shares covalent bonding.
Describe how sodium and chlorine atoms are changed into ions when they react with each other to form sodium chloride, NaCl. What is the name given to this type of bonding? (At. No of sodium = 11; At. No. of chlorine = 17)
What is the difference between a cation and an anion ? How are they formed ? Give the names and symbols of one cation and one anion.
Using electron-dot diagrams which show only the outermost shell electrons, show how a molecule of nitrogen, N2, is formed from two nitrogen atoms. What name is given to this type of bonding? (Atomic number of nitrogen is 7)
This type of bonding is called covalent bonding.
Draw the electron-dot structures of the following compounds and state the type of bonding in each case:(i) C02 (ii) MgO (iii) H20 (iv) HCl (v) MgCl2
(i) CO2- Covalent bond
(i) MgO- Ionic bond
(ii) H2O - Covalent bond
(iii) HCl - Covalent bond
(iv) MgCl2- Ionic bond
Using electron-dot diagrams which show only the outermost shell electrons, show how a molecule of oxygen, 02, is formed from two oxygen atoms. What name is given to this type of bonding? (At. No. of oxygen= 8)
This type of bonding is called a double covalent bond.
Draw the electron-dot structures of the following compounds and state the type of bonding in each case:(i) KCl (ii) NH3 (iii) CaO (iv) N2 (v) CaCl2
(i) KCl - Ionic bond
(ii) NH3 - Covalent bond
(i) CaO - Ionic bond
(ii) N2 - Covalent bond
(iii) CaCl2 - Ionic bond
Explain why, a salt which does not conduct electricity in the solid state becomes a good conductor in molten state.
Write down the electronic configuration of (i) sodium atom, and (ii) chlorine atom.
(i) Sodium - 2, 8, 1 (ii) Chlorine - 2, 8, 7
|How many electrons are there in the outermost shell of (i) a sodium atom, and (ii) a chlorine atom?
i) There is 1 electron is in the outer shell of the sodium atom,
ii) there are 7 electrons in the outer most shell of chlorine atom.
Show the formation of NaCl from sodium and chlorine atoms by the transfer of electron(s).
Why has sodium chloride a high melting point?
Name the anode and the cathode used in the electrolytic refining of impure copper metal.
Write the electron arrangement in (i) a magnesium atom, and (ii) an oxygen atom.
2) An oxygen atom has the electron arrangement like 2, 6.
How many electrons a re there in the valence shell of (i) a magnesium atom, and (ii) an oxygen atom?
2) an oxygen atom has 6 electrons in its valance shell.
Show on a diagram the transfer of electrons between the atoms in the formation of MgO.
Name the solvent in which ionic compounds are generally soluble.
Why are aqueous solutions of ionic compounds able to conduct electricity?
What is the electronic configuration of (i) a sodium atom, and (ii) an oxygen atom ?
i) The electronic configuration of a sodium atom is 2, 8, 1.
ii) The electronic configuration of an oxygen atom is like 2, 6.
What is the number of outermost electrons in (i) a sodium atom, and (ii) an oxygen atom?
i) The number of outermost electrons in a sodium atom is 1.
ii) an oxygen atom has 6 electrons in the outer most shell.
Show the formation of Na20 by the transfer of electrons between the combining atoms.
Why are ionic compounds usually hard?
How is it that ionic compounds in the solid state do not conduct electricity but they do so when in molten state?’
Write down the electron arrangement in (i) a magnesium atom, and (ii) a chlorine atom.
i) The electron arrangement in a magnesium atom is like 2, 8, 2.
ii) The electron arrangement in a chlorine atom is like 2, 8, 7.
How many electrons are there in the valence shell of (i) a magnesium atom, and (ii) a chlorine atom ?
i) There are 2 electrons in the valence shell of a magnesium atom.
ii) there are 7 electrons in the valence shell of a chlorine atom.
Show the formation of magnesium chloride from magnesium and chlorine by the transfer of electrons.
State whether magnesium chloride will conduct electricity or not. Give reason for your answer.
Why are covalent compounds generally poor conductors of electricity?
The atomic number of an element X is 19. The number of electrons in its ion X+ will be: 18B.19
C. 20
D. 21
The atomic number of an element Y is 17. The number of electrons in its ion y- will be : A. 17B. 18
C. 19
D. 20
The atomic numbers of four elements A, B, C and D are 6, 8, 10 and 12 respectively. The two elements which can react to form ionic bonds (or ionic compound) are: A. A and DB. B and C
C. A and C
D. B and D
The atomic numbers of four elements P, Q, R and S are 6, 10, 12 and 17 respectively. Which two elements can combine to form a covalent compound ? A. P and RB. Q and S
C. P and S
D. R and S
The solution of one of the following compounds will not conduct electricity. This compound is: A. NaClB. CCl4
C. MgCl2
D. CaCl2
The electronic configurations of three elements X, Y and Z are :X : 2 Y : 2, 8, 7 Z : 2, 8, 2
Which of the following is correct regarding these elements ?
A. X is a metalB. Y is a metal
C. Z is a non-metal
D. Y is a non-metal and Z is a metal
Which one of the following property is generally not exhibited by ionic compounds ? A. solubility in waterB. electrical conductivity in solid state
C. high melting and boiling points
D. electrical conductivity in molten state
The electrons present in the valence shell of a noble gas atom can be : A. 8 onlyB. 2 only
C. 8 or 2
D. 8 or 4
The atomic number of an element X is 16. The symbol of ion formed by an atom of this element will be : A. X2+B. X3+
C. X2-
D. x-
The number of protons in the nucleus of one atom of an element Y is 5. The symbol of ion formed by an atom of this element will be: A. y3-B. y2+
C. y2-
D. y3+
Out of KCl, HCl, CCl4 and NaCl, the compounds which are not ionic are: A. KCl and HClB. HCl and CCl4
C. CCl4 and NaCl
D. KCl and CCl4
Element X reacts with element Y to form a compound Z. During the formation of compound Z, atoms of X lose one electron each whereas atoms of Y gain one electron each. Which of the following property is not shown by compound Z? A. high melting pointB. low melting point
C. occurrence as solid
D. conduction of electricity in molten state
One of the following compounds is not ionic in nature. This compound is: A. Lithium chlorideB. Ammonium chloride
C. Calcium chloride
D. Carbon tetrachloride
The rechargeable battery used in a mobile phone hand set is usually: A. lead ion batteryB. sodium ion battery
C. hydrogen ion battery
D. lithium ion battery
The number of protons in one atom of an element X is 8. What will be the number of electrons in its ion x2-? A. 8B. 9
C. 10
D. 11
If the number of protons in one atom of an element Y is 20, then the number of electrons in its ion Y2+ will be: A. 20B. 19
C. 18
D. 16
The noble gas having only two electrons in its valence shell is: A. ArB. Ne
C. He
D. Kr
A covalent molecule having a double bond between its atoms is: A. HydrogenB. Oxygen
C. water
D. ammonia
The molecules having triple bond in them are: A. oxygen and ethyneB. carbon dioxide and ammonia
C. methane and ethene
D. nitrogen and ethyne
One of the following contains a double bond as well as single bonds. This is: A. C02B. 02
C. C2H4
D. C2H2
Which of the following has a triple bond as well as single bonds ? A. etheneB. methane
C. ethyne
D. nitrogen